Repair Gold Solders
Repair Solders are lower gold quality than the type stated on the solder. It is recommended for use in old repairs where karat standards are not required. For new goods we recommend
using only plumb solders. Solders are normally supplied in approximately 1 Dwt Pieces. Clipped Solder is available by special order. Sizes are available in 1x1 MM and up. Please specify
size when ordering.
Costume/Low Karat Solders |
Flow Temp |
6Y X-Easy |
1310° F |
6Y Easy |
1345° F |
6W Easy |
1390° F |
8Y Easy |
1350° F |
10K Repair Solders |
Flow Temp |
10Y Easy |
1340° F |
10Y Med |
1395° F |
10Y Hard |
1475° F |
10W Easy |
1365° F |
10W Med |
1425° F |
10W Hard |
1550° F |
12Y Easy |
1368° F |
14K Repair Solders |
Flow Temp |
14Y X-Easy |
1295° F |
14Y Easy |
1325° F |
14Y Med |
1380° F |
14Y Hard |
1471° F |
14W X-Easy |
1320° F |
14W Easy |
1380° F |
14W Med |
1440° F |
14W Hard |
1570° F |
18-22K Repair Solders |
Flow Temp |
18Y Easy |
1425° F |
18Y Med |
1495° F |
18Y Hard |
1535° F |
18W Easy |
1465° F |
18W Med |
1495° F |
18W Hard |
1590° F |
20W Weld |
1610° F |
22W Weld |
1620° F |